Industrial-Grade
Reliable
UAV Motors

Selecting the right motor depends on three key factors:

• Your drone's specifications: Total weight (AUW), platform type (multi-rotor/VTOL/fixed-wing)
• Performance requirements: Thrust-to-weight ratio (typically 1.5-2× for multi-rotors), flight time, payload capacity
• Operating conditions: Environment (temperature, humidity), mission type (hovering vs. forward flight)

Our recommendation:

• Use our Quick Selection Tool (Section 2) to filter by platform and parameters
• For complex projects, consult our engineers for free 1-on-1 technical guidance
• Total thrust should be 1.5-2× your drone's all-up weight for safe operation

Complete Propulsion Systems (Recommended for most users):

• ✅ 80% faster installation: Pre-matched motor, ESC, and propeller—ready to fly
• ✅ Zero compatibility risk: Factory-tested combinations ensure perfect performance
• ✅ Performance guarantee: Each system verified with actual thrust and efficiency data
• ✅ Best for: New projects, fast deployment, guaranteed reliability

Individual Motors (For specific needs):

• ✅ Maximum flexibility: Custom matching for unique requirements
• ✅ Component replacement: Replace failed parts in existing systems
• ✅ Best for: Experienced builders, custom designs, spare parts

Our data shows:

Yes, our motors feature standard mounting interfaces and work seamlessly with major flight controllers:

Compatible Flight Controllers:

• DJI flight control systems
• Pixhawk (PX4/ArduPilot)
• APM (ArduPilot Mega)
• Other mainstream open-source and commercial flight controllers

Standard Compatibility:

• Industry-standard mounting hole patterns (M3/M4 bolt holes)
• Compatible with PWM and CAN bus ESC protocols
• Standard propeller mounting (self-locking or bolt-on)

Our complete propulsion systems are designed for optimal compatibility with comprehensive documentation provided, including:

• Mounting specifications and templates
• ESC parameter settings
• Propeller matching guides

For specialized platforms or custom integrations, our engineers provide free compatibility assessment and integration assistance.

No strict minimum order quantity—flexible solutions for every need:

✓ Sample testing: 1 unit minimum

Support project verification and performance evaluation

✓ Small-batch orders

Perfect for R&D, prototyping, and pilot projects

✓ Volume production: 10+ units

Perfect for R&D, prototyping, and pilot projects

✓ Small-batch orders

Preferential pricing and dedicated technical support

Special customization (OEM branding, specialized coatings, etc.):

Typically 50+ units recommended, negotiable based on requirements

We support:

• Individual units for testing and evaluation
• Small batches for development projects
• Volume orders for commercial deployment
• Custom solutions with flexible terms

In-stock standard products:

• 1-2 business days for common specifications and popular models
• Ships from our warehouse within 24 hours of order confirmation
• Express shipping available worldwide with full tracking

Out-of-stock standard products:

• 10-15 business days for production and quality testing
• Priority production scheduling available for urgent orders
• We maintain inventory forecasts to minimize wait times

Custom solutions:

• 6-7 weeks for custom motor designs and specialized modifications
• Transparent process with trackable progress:
  • Engineering feasibility review: 2-3 days
  • Material procurement: 1 week
  • Sample manufacturing: 1-2 weeks
  • Testing & validation: 1 week
  • Volume production: 1-2 weeks
• Rush service available for critical projects (contact for details)

Global shipping:

• Worldwide express courier (DHL, FedEx, UPS)
• Specialized UAV component handling protocols
• Full insurance and tracking included

For time-sensitive projects, contact our team to discuss expedited production and shipping options.

Technical Support:

• ✅ 24-hour engineer response: Professional technical hotline with expert engineers
• ✅ 1-on-1 consultation: Direct technical support for system integration and troubleshooting
• ✅ Comprehensive resources: Online documentation, installation guides, parameter settings, video tutorials
• ✅ Pre-sales consultation: Free motor selection, thrust calculation, and system matching guidance

Warranty Coverage:

• ✅ Standard 12-month warranty on all motors and propulsion systems
• ✅ Extended warranty options available for commercial and industrial applications
• ✅ < 2% return rate: Industry-leading reliability with 99.5%+ field success rate

Support Services Include:

• Installation guidance and training
• ESC parameter configuration assistance
• Performance optimization recommendations
• Troubleshooting and diagnostic support

Post-sales Service:

• Spare parts availability guaranteed
• Repair and maintenance services
• Performance verification testing
• Upgrade and retrofit consultation

Our commitment: Professional technical support from project start to long-term operation.

MPET (Modular Propulsion & Electronics Technology) is our proprietary integrated system that combines motor, ESC, and propeller into pre-assembled, factory-tested modules.

Key Advantages:

• Installation Simplicity
  • 5-step installation: Reduce assembly complexity by 80% vs. individual components
  • Plug-and-play design: Connect power and signal cables—ready to fly
  • No technical expertise required: Simplified installation for all skill levels
• Zero Compatibility Risk
  • Factory-matched components: Motor, ESC, and propeller optimized for perfect synergy
  • Pre-tuned parameters: ESC settings configured and tested at factory
  • Guaranteed performance: Eliminates trial-and-error component matching
• Proven Reliability
  • Factory testing & verification: Every module tested for thrust, efficiency, and reliability
  • Performance data included: Actual test results provided with each system
  • Quality assurance: Consistent performance across all units
• Time & Cost Savings
  • 80% faster deployment: From unboxing to first flight in minimal time
  • Reduced integration costs: No need for extensive testing and tuning
  • Lower risk of damage: Pre-assembled modules reduce handling errors

Real-world results: Customers report 3-5× faster project completion using MPET systems versus self-assembled solutions.

Yes. Every motor and complete propulsion system undergoes rigorous factory testing before shipping.

Our Testing Process:

• Individual Motor Testing
  • Electrical parameters: Resistance, KV value, idle current verification
  • Mechanical inspection: Bearing smoothness, shaft runout, balance check
  • Quality control: 100% inspection before packaging
• Complete System Testing (For MPET and integrated systems)
  • Thrust verification: Actual thrust measurement at multiple throttle points
  • Efficiency testing: Power consumption and performance curve validation
  • Reliability validation: Extended run testing under load conditions
  • ESC calibration: Parameter optimization and function verification
• Performance Documentation
  • Each system includes actual test data and performance curves
  • Thrust charts showing performance across throttle range
  • Efficiency data for mission planning and battery sizing
  • QC inspection reports for traceability

Quality Standards:

• 99.5%+ mission success rate in demanding applications
• ISO-certified manufacturing processes

Absolutely. With 16 years of propulsion expertise and 400+ patents, we specialize in custom UAV motor solutions.

Customization Services:

• Parameter Customization
  • KV value adjustment: Optimize RPM for specific propeller and voltage combinations
  • Voltage range: Custom winding for 3S to 24S+ battery configurations
  • Thrust/power tuning: Tailor motor characteristics for specific payload and mission profiles
• Mechanical Customization
  • Shaft diameter and length: Custom dimensions for unique propeller mounting
  • Mounting pattern: Non-standard bolt patterns for specialized frames
  • Housing modifications: Custom bell designs, mounting brackets, or protective features
• Environmental Protection
  • IP rating upgrades: Enhanced sealing for marine, desert, or extreme environments
  • Temperature range: -40°C to +85°C operation for all-weather missions
  • Specialized coatings: Anti-corrosion, chemical-resistant, or high-temperature treatments
• OEM & Branding
  • Custom colors and finishes: Match your brand identity
  • Logo and labeling: OEM branding on motors and packaging
  • Proprietary designs: Exclusive motor development for your platform

Custom Solution Process:

• Consultation (Week 1): Requirements analysis and feasibility assessment
• Engineering Design (Week 2-3): Custom motor specification and optimization
• Prototyping (Week 3-4): Prototype manufacturing and initial testing
• Validation (Week 5-6): Performance testing and refinement
• Production (Week 7-8+): Volume manufacturing and delivery

Getting a quotation is fast and easy through our online form:

Click the "Get Your Solution" button Anywhere on this page to access our quotation request form. Fill in your basic requirements, and our team will respond within 24 hours with:

• ✅ Detailed pricing: Unit price, volume discounts, shipping costs
• ✅ Product recommendations: Optimal motor solutions for your application
• ✅ Technical specifications: Complete parameters and performance data
• ✅ Lead time confirmation: Delivery schedule and availability
• ✅ Free technical consultation: 1-on-1 engineer guidance

What to Include in Your Request:

• Drone specifications: Platform type, total weight, application scenario
• Motor requirements: Desired thrust range, voltage, quantity needed
• Timeline: Project schedule and expected delivery date
• Volume: Initial order quantity and potential future requirements

Response Time:

• Standard quotations: Within 24 hours
• Custom solutions: 2-3 business days (includes engineering assessment)
• Urgent requests: Same-day response available

Special Offers:

• Volume pricing (10+ units)
• Long-term partnership discounts
• OEM/System integrator programs
• Educational/research institution support

Our streamlined 4-step process ensures fast and reliable delivery:

• Submit Requirements (Day 1)
  • Fill out our solution form with your specifications
  • Our engineers receive and review within 24 hours
• Solution Matching (Day 1-2)
  • Engineer provides 1-3 tailored motor recommendations
  • Includes specifications, pricing, and delivery timeline
• Order & Production (Day 3+)
  • In-stock items: Ship within 1-2 business days
  • Custom solutions: 6-7 weeks (feasibility → procurement → prototype → testing → production)
• Delivery & Support (Ongoing)
  • Express worldwide shipping with tracking
  • Installation guidance and technical support
  • 12-month warranty with >2% return rate

Timeline Summary:

• Quote response: 24 hours
• Stock items delivery: 3-5 days
• Custom solutions: 6-7 weeks

LIGPOWER is T-MOTOR's official strategic partner and authorized distributor, offering the complete authentic T-MOTOR product portfolio with full manufacturer warranty and support.

By choosing LIGPOWER, you benefit from:

✅ Official authorization guarantee: 100% authentic T-MOTOR products with factory quality assurance

✅ Most comprehensive product selection: Complete T-MOTOR range available globally with local inventory

✅ Direct technical support: Access to T-MOTOR engineers for consultation and troubleshooting

✅ Priority shipping & inventory: Faster delivery with local stock and priority allocation

✅ Dedicated B2B services: Volume pricing, flexible payment terms, and project support

✅ Exclusive access: Latest product releases, custom solutions, and OEM services

Our partnership ensures you receive genuine T-MOTOR quality with enhanced service excellence.